The Best 6 Dirt Bike Stands in 2021

Table of Contents

Dirt bike stands are used to keep your bike up when it’s not in use, or when you’re changing the wheels or doing maintenance. It’s normally used to keep the dirt off your bike.

Dirtbike stands have a wide range of uses, from improving the health of your dirt bike to display purposes. Dirtbike stands can be used to remove or add parts such as wheels and handlebars for simple maintenance tasks.

Why do I need a dirtbike stand?

If you’re interested in doing any sort of maintenance yourself on your dirtbike, a stand is a very helpful tool. Changing tires and wheels will be much easier with a dirtbike stand to hold the bike in place. Other tasks such as adding oil or grease, chain cleaning/lubing, or checking the air pressure in your tires can all be done easier by using a stand. Using a stand for display purposes will also help maintain the health of your dirt bike. Out of sight, out of mind is a phrase that can be applied to dirt bikes when they’re left standing upright for extended periods. Rust on various metal pieces will inevitably begin to form if you do not store your bike in a shed or garage, and these stands help to prevent such rust from forming on your dirt bike’s most vulnerable parts.

What to look for when buying a dirtbike stand?

Before you make a decision on which bike stand is best for your needs, there are a few things to consider. A dirtbike stand can hold the bike in either an upright or laid down position. The upright position may be preferred by some because it takes up less space when not in use, and can easily display your bike as part of a showpiece in your garage or shed. However, it’s important to make sure that your bike can handle the weight of being upright in a stand before you decide on one with this positioning.

A dirtbike stand will normally come with various wheel clamps to support different wheelbases. Dirt bikes are not standardized when it comes to wheelbase before, so it’s important to check your wheelbase measurements by purchasing a dirtbike stand. If you’re looking for something smaller than the standard dirtbike stand, it’s also worth checking out other types of stands that specialize in smaller bikes such as mini or pocket dirtbikes.

A big factor to take into consideration when buying any type of dirt bike stand is the cost of the dirt bike stand. The cheapest stands are normally just simple metal pieces to hold your bike up, whereas more complex designs will have additional features such as clamps to tighten down your bike or tools that come with them. These types of dirtbike stands tend to be higher in price, but you get what you pay for.

How to use a dirtbike stand

Using a dirtbike stand can be fairly straightforward, although there are some things you should keep in mind when using them. You must always secure your bike properly on the dirtbike stand before attempting to lift it with your hands or any other method. Some dirt bike stands have a locking mechanism, while others will have screw clamps to ensure your bike stays in place. Always ensure that the stand has been secured properly before attempting to lift it by any means other than the designated support bars on the stand itself.

Basic Types of Motorcycle Stands:

There are four types of motorcycle stands available depending on the type of motorcycle. There is a universal stand, scissor lift, swingarm, and triangle stand.

The universal stand is a basic motorcycle stand used for most motorcycles from cruisers to street bikes. The universal motorcycle stand has a platform that adjusts to the height required for your bike and a set of four legs that hold the stand in place.

The scissor lift motorcycle stand is a stable and versatile option for many different types of motorcycles. The platform on this motorcycle stand adjusts to your bike but the legs remain stationary no matter what position you adjust it to making this a very stable option. This type of stand also has the ability to tilt backward making it easier to access the rear of your motorcycle if necessary.

The swingarm motorcycle stand is a specialized stand that can be used for street bikes and sportbikes. The platform on this motorcycle stand pivots allowing you to adjust the height as needed and keep your bike vertical so it takes up less space when not in use.


The Best 6 Best Dirt Bike Stands in 2021


MSR Hi-Jack Stand


The MSR Hi-Jack Stand is a hydraulic motorcycle scissor lift that is designed to serve the same purpose as a motorcycle jack. It lifts your bike to a comfortable working height, allowing you to perform maintenance tasks without straining yourself.

This stand has adjustable legs so you can set it up at any level between 14 inches and 33 inches off the ground. It also has a foot pedal that you use to lift the bike up and down, which saves your back from having to bend over repeatedly while you are working on it.

The MSR Hi-Jack Stand is designed with locking footpegs that secure your motorcycle in place for added safety. There’s also heavy-duty steel frame construction and a safety pin for extra security.

Pros
  • Lifts bike to a comfortable height for maintenance and cleaning.
  • Foot pedal system makes it easy to lift and lower the bike without using your back.
  • Adjustable legs allow you to set the stand to any height from 14-33 inches off the ground.
  • Footpeg locks hold the bike in place.
  • Heavy-duty steel frame and safety pin for extra security.
  • Large oil drain hole and rubber top that resists gas and oil spills.
  • 300 lb weight capacity.
Cons
  • Expensive compared to other motorcycle stands on the market today. This is probably because it has all of the features mentioned above which make it a good choice.
  • Only rated for 300 lb weight capacity which is average compared to similar models on the market today.




BikeMaster Easy Lift & Lower Off-Road Motorcycle Jack Stand


MSR BikeMaster Easy Lift is a dirt bike stand that allows you easy lifting of your dirt bike. The damper shock prevents your motorcycle from “free-falling” when lowering it. For added security in the raised position, there’s a lift lever lock. The lowest collapsed height is 9-3/4″ and the highest collapsed height is 14-1/2″. The lowest extended height is 13″ and the highest extended height is 17-3/4″.



Matrix Concepts M64 Elite Stand


The Matrix Concepts plastic stand is composed of a unique composite mix. The M64 is the most respected stand out there, having been used, tested, and accepted by some of the best off-road racing, motocross, and supercross teams.

The M64 was designed with the professional in mind. Its lightweight design makes for easy transport and storage, but it is still made to handle the toughest abuse. With injection-molded plastic construction, you can be sure that these stands will hold up to years of use and abuse. The large graphic side panels allow you to show off your bike’s graphics, and they can be customized with your name and number for extra style points. The extra-wide feet will not allow the stand to rock or move around when in use which makes it very stable.

Pros
  • Lightweight
  • Wide base prevents tipping
  • Large graphic side panels
  • Customizable
Cons
  • There are no known issues.


Dr Dry Red/Black HC2 Lift Stand


It is a sturdy stand on which dirt bikes can be lifted to change wheels, tires, or carburetors. It is equipped with a damper shock absorber that eliminates the sudden drop and provides a smooth landing of the motorcycle. The top plate is adjustable for different heights (10-14inch) so it fits under most dirt bikes.

It is easy to operate, the durable double-long levered jack pedal has a grease seal that ensures smooth operation. The plate where the dirt bike is placed is coated with special anti-skid paint on which metal springs are installed to resist corrosion and rust. Mechanics will be pleased by the fact that the lift is equipped with a special device for wheel tightening.

Dr Dry HC2 Lift Stand is designed to fit most sport motorcycles and motocross dirt bikes. The simple construction allows users to lift motorcycles with or without engines.

Pros
  • Is designed for sport motorcycles and motocross dirt bikes.
  • Can be used to change wheels, tires, or gasoline.
  • The damper shock absorber eliminates the sudden drop and provides a smooth landing of the motorcycle.
  • It is equipped with a special device for tightening wheel nuts, which is used by mechanics.
Cons
  • Does not include an engine lift.
  • When the motorcycle is lifted, it cannot be moved without wheels.


Polisport Motorcycle Stand


Polisport Dirtbike Stand is a new type of dirt bike stand. It is a simple, lightweight, and sturdy bicycle storage tool designed for motorcycle shops and avid motorcyclists alike. The product can hold up to 550 pounds/250 kilograms allowing the user to easily store their dirtbikes in a shed or garage when not in use. The dirt bike stand is made from thick polypropylene plastic with an injection-molded rubber top, which supports the weight of the motorcycle sturdily. The dirt bike stand also folds up to a 2-inch thick horizontal bar for easy storage in your garage or shed when you’re not using it.

Simply put one end of the shaft under the front tire of the dirtbike and the other under the rear tire. Then lean it to a 45-degree angle, or whatever works best for your bike, and push down on the handle until you hear a click. That click lets you know the stand is safely in place.

Polisport Dirtbike Stand is a simple and lightweight dirt bike stand that works well with lighter bikes. The product’s main benefit is its small size, which makes it easier to store when you’re not using it.

Pros
  • Polisport Dirtbike Stand is made from thick and sturdy plastic.
  • Strong enough to hold up to 550 pounds/250 kilograms of dirtbike weight.
  • Folds up compactly for easy storage, then opens quickly and easily when needed.
Cons
  • Its size is not as wide as other dirt bike stands on the market making it inconvenient to use for multi-bikes

Adjustable Motorcycle Dirt Bike Lift


An Adjustable motorcycle dirt bike lift is a device for lifting one or both wheels transversely off the ground to access under-carriage components.

The advantage of this type of lift is the ability to raise and support the motorcycle exclusively with its own weight, unlike most hoists that need part of their structure in contact with the floor. A motorbike lift is a great option because it’s safer and more efficient.

Being able to raise your bike without any help from other people, ramps or stands allows you to avoid injury and work easier.

Pros
  • Easier to use than regular stands or ramps.
  • Safer when working under your bike.
  • Save time and money in the long run
Cons
  • Not suitable for motorcycles that have a center stand or side stand as these will be left hanging in mid-air when the lift is used.



How to put a dirt bike on a stand?

First of all, you need to find a good and sturdy piece of ground to put your dirt bike on. The best thing is to use a flat, even surface that is made out of solid material such as asphalt or concrete without any gaps where your dirtbike could get into and fall off. If you can not find such an area safely, make sure to use a piece of plywood, chipboard, or similar hard material.

Position your stand in front of your dirtbike and lift the back wheel using the jack that should come with the stand. Make sure that you can fit your rear tire into the groove of your stand without any problems. If it is possible, try not to lift the whole dirtbike, it is enough if you only use the rear wheel to get on and off of your dirtbike.

Secure your dirtbike by properly attaching the front fork of the bike to your stand, then sit on top of your dirtbike without starting it or putting any weight on the kickstand. Slowly tilt back until the rear wheel of your dirtbike touches the ground safely. Make sure that there is no risk of falling over while you are busy with any maintenance work on your bike, especially when doing repairs or servicing on your bike’s engine or gearbox.

Why put a dirt bike on a stand?

There are several reasons why you might want to use an adjustable dirtbike stand, the most important ones including:

  • You can quickly get on or off of your bike while it is safely sitting on a stand. This is especially helpful when you have a high seat and need to lift your leg high in order to sit down comfortably.
  • You can raise the rear wheel of your dirtbike off the ground in order to clean or service it properly.
  • You can perform repairs and services safely on your dirtbike without having to use a jack in order to support your bike while you are working on it. This means that you will not need any dangerous lifts such as ramps or scaffolds or any assistance from another person.
    You can quickly get on or off of your dirtbike, especially if it is sitting high and you need to use a ladder in order to sit down and get off safely.
  • It reduces the risk of incidents such as tipping over your bike when you are working without having the proper equipment while leaving it on the side of a road or somewhere else. You can also avoid injuries from bikes that fall over while you are working on them.
  • It allows you to safely work on your bike without damaging any parts such as expensive sportbike body panels and spoilers which can get easily scratched, dented, cracked, or broken. This is especially important if you are performing any repairs or maintenance on your bike’s bodywork.
  • It prevents dirt, water, and grime from getting all over the bike allowing you to safely clean it without worrying about damaging sensitive parts of your bike.

Why do motocross bikes not have kickstands?

Motocross dirtbikes do not come with a stand because you will be using your bike in the dirt where there might be significant damage if it falls over due to even a small bump or obstacle. This means that you will need to use a motocross stand and prevent any possible injuries while permitting yourself quick access to your bike during races.

Conclusion:

Stands are very useful when it comes to servicing your dirtbike or putting your bike on display, so if you’ve just recently purchased a stand for your dirtbike and don’t know how to use it properly, this article should help. If you’re not sure about the different types of stands there are, we recommend that you go with a universal motorcycle stand as it is quite safe, stable, and easy to use.

If you have any questions or would like to share your own dirt bike stand experiences, please let us know in the comments below! Good luck and happy motoring!

Adam Mors

Adam Mors

My son tried to ride many kinds of 2 wheels motorcycles.
It’s important to choose the right motorcycle for your young rider, so please read my best dirt bikes for kids reviews. Have FUN!

About Me

My son tried to ride many kinds of 2 wheels motorcycles, from dirt bikes and cruisers to ATVs. It’s important for you as a parent or guardian figure out the best motorcycle type that will be right for your young rider, so please read my reviews on some great choices!

Recent Posts